|
Tips To Check How Clean Is A Tanning Bed |
|
|
|
Page 1 of 2
The trend of going in for artificial tanning
is fast becoming a way of life for busy executives and their spouses.
This is because the time when one can get away from work and go on a
holiday may not be a time when one can bask in sunshine on a beach.
Sometimes a holiday might be to a destination where sunshine is not the
criteria at all. But since a tanned look adds to the idea of a holiday
well spent, it makes sense to settle for a stint of artificial tanning.
But wait…How clean is the tanning bed on which you will be taking
the treatment?
To make sure about hygienic tanning one must check
a few details about the tanning bed in order to make sure that the
equipment used is well serviced, clean and in proper working order.
To
check if the tanning bed is in a fit condition one must take a look at
the inside of the tanning bed. Even a casual glance at the insides can
reveal if the bed is cleaned regularly.
The lamps and reflectors
need to be checked for cleanliness on both sides. As the acrylic on
which the tanning takes place is the most hard-worked portion of the
bed, it must be changed at least once a year so it is a good idea to
find out when the last change was carried out.
Some beds need to
have the acrylic changed even between lamp changes. Also the acrylic
needs to be kept in a well cleaned and polished condition because the
use of warm water leaves behind deposits and these build up ugly stains
on the acrylic. An acrylic cleaner can do the trick if it is regularly
applied on the acrylic in the tanning bed.
Before lying down on
the tanning bed it is necessary to run a look on the bed to make sure
there are no ugly bulges or worn out hinges so that the risk to injury
during the process of tanning is minimized. The filters need to be
inspected to make sure that the right amount of heat is being given off
and there is no danger of over heating leading to burns.
|
